Download Tecno T511 Firmware
Download Tecno T511 Firmware
Below is the direct link to download the Tecno T511 Firmware.

Note:
Follow the instructions on how to flash the device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (cant power on, cant charge and will not be detected by a computer).

Follow the instructions on how to flash the device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact Firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (cant power on, cant charge and will not be detected by a computer).
Using Volcano Box: STEP 1: Download & extract the Firmware on your computer. STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Volcano Box. STEP 4: Click on Coolsand &... STEP 5: Select Write Flash. STEP 6: Select the Bin File from the Firmware you have downloaded. STEP 7: Select Auto-detect Pinouts (use pinouts connector). STEP 8: Click on the Run button. STEP 9: Patiently wait for device to connected. STEP 10: Once the device has been connected, STEP 11: Patiently wait for the process to complete.
See Detailed Instruction with images Using Miracle Box:
STEP 2: Install the USB Drivers (skip this step if drivers are already installed). STEP 3: Launch Miracle Box. STEP 4: Power off device, Insert USB Cable on the device (dont power on), Press & hold the "0" button key until Open USB Download appears on device screen. |
TECNO T511 FIRMWARE |
---|
- Coolsand chip - DOWNLOAD FIRMWARE |
|
Please leave a comment after using this Firmware
Report if you cannot download this file.
Report if you cannot download this file.