Download Tecno Camon CX X688 Stock ROM

Below is the direct link to download the Tecno Camon CX Stock ROM (Firmware).

Note:
This is a Stock ROM (Firmware) for Tecno Camon CX. Do not flash this ROM on Tecno Camon CX Air.

If you are in need of Tecno Camon CX Air Stock ROM click here.

Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (cant power on, cant charge and will not be detected by a computer).

TECNO CAMON CX SPECS

Operating System	Android 7.0 with HiOS (Nougat)
Chipset	MediaTek MT6750, MT6753 & MT6755
Processor	CPU: 1.3GHz Quad-core, GPU: Mali-T720
Storage	RAM: 2GB, ROM: 16GB, up to 128GB micro SD
Dimension	75.8 x 152.8 x 7.75 mm
Connectivity	Wi-Fi: 802.11 b/g/n, Wi-Fi hotspot, 2G: GSM, 3G: HSDPA, 4G: LTE - Bluetooth v4.0
Camera	Rear Camera: 16MP, Front Camera: 16MP
Battery Capacity	3200mAh

TECNO CAMON CX STOCK ROM
MT6755_HiOS_TECNO-CX_7.0_TECNO_CX-H501DE-N-170510V115 DOWNLOAD ROM Password to extract file is: www.romshillzz.com

How To Flash

Using SP Flash Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch SP Flash Tool.
STEP 4: Click on Download.
STEP 5: Select Scatter-loading.
STEP 6: Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
STEP 7: Select Format and click Start.
STEP 8: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
STEP 9: Patiently wait for device to be formatted.
STEP 10: After format,
STEP 11: Select Download and click Start.
STEP 12: Connect device & Patiently wait for the process to complete.
See Detailed Instruction with images

Using Miracle Box:
STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch Miracle Box.
STEP 4: Click on MTK.
STEP 5: Select Write.
STEP 6: Select Format ALL[Android] (Optional but recommended).
STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.
STEP 8: After Selecting Stock ROM (Firmware),
STEP 9: Click on the Start button.
STEP 10: Connect device holding volume + and volume - key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.
STEP 12: Patiently wait while the process completes.

See Detailed Instruction with images

Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (cant power on).

==>> Learn how to backup Stock ROMs (Firmwares) Before flashing from here

[*] Take a Backup of your personal data
visit link download

Search This Blog

Apps Download 2018